Thursday, November 29, 2012

N Scale Model Railroad Best Practices - Benchwork

I have been thinking about a new layout for some time now, and am beginning to formalize some ideas and putting them on paper.  It's hard to believe that it has been about a decade since I started my first true N scale layout that I was able to complete.  I don't even have photos of the construction progress since I bought my first digital camera about the time the layout was finished.  Wow have times changed!  Since then, I think I have taken several thousand photos of my hobby, and have a digital camera that will take high definition video too.  As I continue to pursue the next layout plan and design, I thought it would be interesting to consider some of the best practices that I have adopted over the years, and document them here on my blog.  So here is an attempt to share years of experience in a few photos and text.

I thought I would start with benchwork, since that is where the 3 dimensional idea that is in my head actually begins to take shape.  I wrote a fairly comprehensive article about plywood benchwork in my Marias Pass series, so I won't go into that detail here.  This is more of an overview of my experience building benchwork, and several examples.

Benchwork Best Practices:

I have used plywood framing for my last two layout structures, and will probably never use anything else.  I simply can't accept the warped junk that is found at home improvement stores.  Sure you can buy premium lumber, but it is overpriced and too pretty to be hidden by a fascia board.  Instead, I buy 3/4" birch or oak veneer plywood, rip it into boards, and make my own lumber.  Sure you needs tools to accomplish this, but I  happen to be a handy guy, so the tools have more than paid for themselves.

Even though the framing material has changed over the years, the one common thread throughout is the fascia.  I continue to use 1/8" masonite for my fascia.  It is a great material that cuts easy, bends around modest curves, and provides a very professionally looking edge.

I use a long piece of masonite as a fence for my ripsaw.  A steady hand will make perfectly square boards.  Once I have a stack of lumber, I then turn to my miter saw to cut the pieces to length.



Here is the benchwork for the Marias Pass layout.  The width of the boards for the open frame are a true 6", and probably overkill, but I like solid benchwork.  Also, this layout is portable, so needs to resist twisting while being carried and loaded.




Here is a two section frame that I built for a total of 14'.  This was intended to become a BNSF Orin Line layout, but instead it was sold to a friend that designed it into a desert themed layout.  You can see the 2" foam in the background that was used for the track surface.  The frame sections and leg assemblies are all built using plywood.



Here is layout #1 on its side for a photo.  I used regular pine lumber with a plywood cookie cutter subroadbed.


The Rocky Mt. Sub had a similar frame design to my first layout.  Again using standard pine 1x4's, I built an open grid frame with a plywood cookie cutter subroadbed.


 My BNSF Orin Line was the first layout to use plywood for the frame.  I am picky when it comes to building materials, and wanted a very straight and sturdy structure since I was going with a 4' x 10' footprint. a sheet of 1/2" plywood was used for the top, in order to provide a rigid surface for track and scenery.



 Here is a layout benchwork that I helped a friend build several years ago.  The design is nearly identical to the 5'x7' Rio Grande layout that Mike Danneman built.  It also used standard pine 1x4's with a plywood cookie cutter subroadbed.



6 comments:

  1. John,
    You're absolutely correct about using ply over lumber! When we were building our Bend Track modules I started using a combination of 1/2" and 3/4" plywood for the framework. Cheaper, Stronger and very seldom warps or expands, and you can cut it to any size needed. The only drawback; you have to be careful when running a screw into the edge of it. :)

    ReplyDelete
    Replies
    1. Allen, thanks for the comment. I have actually used a lot of ripped plywood for home projects as well, since I usually have some boards left over from benchwork projects. While I really dislike green lumber, it seems that plywood is still pretty green too any more these days, and usually has a slight bow in it. But overall, it still works well. It's hard to find good cured wood materials.

      Delete
  2. I have a recommendation. Go to Woodcrafters and purchase a pocket jig. These allow you to screw at a diagonal, such as seen in cabinetry. No more end screws!

    Also, try using Birch ply as it is dry and generally not warped or bowed. It is pricier than other grades ply.

    ReplyDelete
    Replies
    1. I know exactly what you are talking about in regards to the jig. Thanks for the suggestion. As far as plywood goes, I did use Birch on the Marias Pass, which worked well. It has more ply layers than the oak alternative, at least where I was shopping. It was a good quality piece of material, but it was still very fresh and green. I usually assemble my benchwork as soon as I can after I cut my lumber, so it doesn't have a chance to warp.

      thanks for the comment.

      Delete
  3. How Lemeridian funding service  grant me a loan!!!

    Hello everyone, I'm Lea Paige Matteo from Zurich Switzerland and want to use this medium to express gratitude to lemeridian funding service for fulfilling his promise by granting me a loan, I was stuck in a financial situation and needed to refinance and pay my bills as well as start up a Business. I tried seeking for loans from various loan firms both private and corporate organisations but never succeeded and most banks declined my credit request. But as God would have it, I was introduced by a friend named Lisa Rice to Le_meridian funding service and undergone the due process of obtaining a loan from the company, to my greatest surprise within 48hrs just like my friend Lisa, I was also granted a loan of $216,000.00 So my advise to everyone who desires a loan, "if you must contact any firm with reference to securing a loan online with low interest rate of 1.9% and better repayment plans/schedule, please contact Le_meridian funding service. Besides, he doesn't know that am doing this but due to the joy in me, I'm so happy and wish to let people know more about this great company whom truly give out loans, it is my prayer that GOD should bless them more as they put smiles on peoples faces. You can contact them via email on {lfdsloans@lemeridianfds.com Or lfdsloans@outlook.com} or Text through Whatsapp +1-989 394 3740.

    ReplyDelete
  4. I would like to thank Ultimate Life Clinic for reversing my father's Amyotrophic Lateral Sclerosis (ALS). My father’s ALS condition was fast deteriorating before he started on the ALS Herbal medicine treatment from Ultimate Life Clinic. He was on the treatment for just 6 months and we never thought my father will recover so soon. He has gained some weight in the past months and he is able to walk with no support. You can reach them through there website www.ultimatelifeclinic.com

    ReplyDelete